1 Raskatkina O.V.

Nizhny Novgorod State University of Architecture and Civil Engineering

There is a method of using the corded plumb as vertical reference straight line, located in front of the objective of a digital photocamera in the article. When we take picture of the object under study, there will be this straight line in the photo, from which we can carry out all necessary measurements in the Paint system with the following conversion them into metric system. All possible variants of location of the reference straight line relative to it axis are considered by the example of the construction of the tower round shape and it is shown a method of heeling calculation by image processing results. Experimental research to determine the degree of influence of plumb location in the photo relative to it axe on the accuracy of the heeling determination was carried out by shooting the brick chimney with the 30 metres height when the plumb is located on the chimney axis and on different distance from the left and right of the axis. It is set in the result that the plumb location has influence on the accuracy of heeling determination. The optimal location is on the centre of the top section of the chimney and there is shown the method of accounting corrections due to inaccurate location.
1.   Raskatkina O. V. Kalibrovka cifrovoj kamery po vertikal'nomu bazisu s cel'yu izmereniya rasstoyanij // Materialy VII mezhdunar. nauch.-prakt. konf: «Prioritetnye napravleniya razvitiya nauki i obrazovaniya» (CHeboksary, 4 dekabrya). 2015, 4(7). pp. 216-222.
2.   Ustavich G.A., Poshivaylo Ya.G. (2005) On the application of non-metric digital cameras for engineering-geodetic measurements. Geodesy and cartography, (8), pp. 19–24.
3.   Shekhovcov G. A., Shekhovcova R. P. Novye sposoby formirovaniya i ispol'zovaniya vertikal'nyh referentnyh pryamyh. Izv. vuzov. Geodeziya i aehrofotos"yomka, 2014, no. 6, pp. 22-27.
4.   Shekhovcov G. A., Shekhovcova R. P. Geodezicheskie raboty pri ehkspertize promyshlennoj bezopasnosti zdanij i sooruzhenij. Nizhnij Novgorod: izd. NNGASU, 2014, 176 p.
5.   Shekhovtsov G.A., Shekhovtsova R.P., Raskatkin Ju.N. (2016) About method and results of calibration of photocamers to measure distances. Geodezia i Kartografia, 77(2), pp. 46–53. (In Russian). DOI: 10.22389/0016-7126-2016-908-2-46-53.
Raskatkina O.V., 
(2017) Impact of plumb location on the determination accuracy of chimney heeling by photographic method. Geodesy and cartography = Geodezia i Kartografia, 78(1), pp. 55-59. (In Russian). DOI: 10.22389/0016-7126-2017-919-1-55-59
Publication History
Received: 19.05.2016
Accepted: 28.11.2016
Published: 20.02.2017


2017 January DOI: